CLIFFORD G5
Protecting your vehicle with some of the best products on the market today
​
Please Note:
MOST Vehicles From 2005 Onwards requires a DBALL Module to Allow the Alarm to Communicate with the Vehicle At an extra cost
CLIFFORD CONCEPT 650 MK3
​Thatcham Category-1 system
​Clifford concept 650 meets and exceeds the highest standards of the UK insurance industry, and installing one may qualify you for discounted vehicle insurance as a result. The Concept 650MkIII's built-in tandem immobiliser circuits are passively armed soon after you park so that your vehicle always remains protected, and these main electronics also reside in an armoured-steel enclosure as an added security measure.
​
Specification
​
Dual-Circuit Immobiliser
Includes two new style 5-button Transmitters
On-board door locking relays with double pulse lock/unlock capability
Dual-Zone Proximity Sensor
SSPS5 Battery Backup Siren with Data-link and 6-tone capability
Dome Light Supervision
3 Programmable Aux channel outputs
Total Closure capability.
CLIFFORD CONCEPT 470
BASIC ALARM & IMMOBILISER
3 Channel Security System with Optional Keyless Entry
ACG2 Anti-Code Grabbing Technology
Built-In Parking Light Flasher
Selectable Dual-Point Smart Secure Immobilization
G5 Glass Break Sensor
Dual Stage Vibration/Impact Sensor
Medallion2 Programmable Tone Speaker Siren
Bright Blue LED Status Indicator
PlainView2 Coded Valet/Override Switch
CliffNet™ DataPort
2 Auxiliary Channels
Includes Two 5-Button Remote Controls
ARROW 5.1
2 Channel Security System with Optional Keyless Entry
ACG2 Anti-Code Grabbing Technology
Built-In Parking Light Flasher
Fault-Proof Starter Interrupt
Dual Stage Vibration/Impact Sensor
6-Tone Insignia2 Siren
Bright Blue LED Status Indicator
PlainView2 Coded Valet/Override Switch
CliffNetTM DataPort
1 Auxiliary Channel
Includes Two 3-Button Remote Controls
Clifford 330X Can-Bus Alarm
Cat 1 upgrade can-bus alarm system
This alarm system is an insurance approved cat 1 upgrade and it will add supreme security to your vehicle.
Upgrading with this alarm system will benefit with no extra key fobs on your key ring as it will use the OEM key to arm and disarm the system.
With the option to add more sensors and horn hook-up plus the option to add immobilisation to your vehicle not included in the standard cost.
it's a grate system for the price and will cover a wide range of vehicle brands.
CLIFFORD - UPGRADES
Please Note:
MOST Vehicles From 2005 Onwards requires a DBALL Module to Allow the Alarm to Communicate with the Vehicle At an extra cost
_edited.png)
SMART START DSM 550
The Directed SmartStart GPS (DSM250i) is a revolutionary new product that allows seamless control and communication between your smartphone, and your vehicle via the Directed SmartStart app.
Now you can remote start, lock and unlock your car as well as many other options including remote immobilisation, boot release, total closure - just by pushing a button on your smartphone.
Annual subscription required (Search for Airtime Plan), but no other ongoing or data charges. £99.99 Pre year
_edited.png)
DIRECTED OMNISENSOR
Impact/Vibration Sensor
A vibration/impact sensor with Clifford's unique DSP algorithm. Dual sensing levels distinguish between attempted intrusion and less significant impacts. If someone bumps your car with a car door, a warning is sounded If forced entry is detected, the full alarm sounds. Remotely adjustable. (Available only for higher-end models)
_edited.png)
DB-ALL - 2
The DB-ALL2 is an all in one door lock and override module that covers over 95% of cars on the road today.
It will support legacy systems like VATS and PASSLOCK as well as support doorlocks and override on the most modern of cars like Toyota with push-start ignition system and Chrysler with electronic ignition.
The DB-ALL offers the most advanced hardware architecture in our industry and covers more cars than any of our competitors.
_jpg%20Clifford.jpg)
CLIFFORD G5 SMARTSTART
INTERFACE / MODULE
This interface is required when the new Smartstart module (DSM250 / VSM250) is being connected to the popular Clifford G5 Alarms
(Concept 470, Concept 650 & 650 mk2 & 3).
Intellistart module is still required if engine-start feature is to work.
DIGITAL TILT / MOTION SENSOR
_edited.png)
CLIFFORD INTELLISTART 4
REMOTE ENGINE START
The 507M Tilt Sensor is used to compliment the level of security provide by the existing sensors found on most alarm systems. The tilt sensor detects when the vehicle is being raised in an attempt to remove the wheels or tow the vehicle. The 507M is capable of independently referencing the vehicle's initial angles of inclination each time the vehicle is parked, ensuring the most accurate tilt sensing possible.
Clifford IntelliStart 4 Product Details
Suitable for manual and automatic transmisson
IntelliStart allows you to start the car before you get in.
Compatible with both Clifford G4/G5 Systems
Just the touch of a button starts the engine, but leaves the doors still locked and the alarm still on